I\'m writing a Java program for my work-study program which relies on the RXTX serial drivers. It is running well on my testing machines, however I have noticed that when run on a machine that does no
I have a device that uses serial (via a USB adaptor) to interface with my PC. I\'m having real difficulty getting it to play nicely in C#. I know that it works properly because the vendor-supplied sof
I am trying to build an applet that can open a serial port and communicate with the same. I have used rxtxcomm.jar for the serial communications. I have an applet built that works in the eclipese envi
I am developing a Qt/C++ programme in QtCreator that reads and writes from/to the serial port using QextSerialPort. My programme sends commands to a Rhino Mark IV controller and must read the response
I am having difficulties with the below code; int i = 0; int x = 0; int ch ; int n; while((i < sizeof(buffer) - 1) && (x < (TIMER_FREQ*30)))
I have created a C# program that can dial a phone. Now what I have to do is count the number of rings occuring in the remote phone device.
I am receiving messages over serial port from a micro-controller. i am using a baud rate of 9600. I have a program w开发者_运维技巧ritten using win32 API that receives the messages. Sometimes it happ
I have built a custom embedded system using debian 6.0. using /etc/inittab i have m开发者_JS百科ade several (8) processes running on different /dev/ttyX terminals, which i can switch between using Al
I am trying to create a program to switch the com port number of currently attached device. For example, I have a device assigned to com port number 5, and I want to change it to maybe com port number
I am debugging an application developed in Qt/C++ using QtCreator. My application reads from the serial port using QextSerialPort, where the serial port is connected to a Rhino Mark IV controller.
加载中,请稍侯......