maven报错:Failed to execute goal on project问题及解决

目录

• maven报错:Failed to execute goal on project
• 项目结构
• 解决RHiCgI方法
• maven加载依赖报错问题
• 出现的问题
• 一、检查IDEA中的maven配置
• 二、添加对应setting.XML到上图目录中
• 三.setting.xml中写入配置
• 总结

maven报错:Failed to execute goal on project

项目结构

在hzz-entity项目上运行Maven install时报错如下：

解决方法

第一步：首先检查Java -version与javac -version的版本是否一致，不一致的情况下需要修改java环境变量将其保持一致。

注意：如果安装过oracle，因oracle自带的jre可能导致java版本不是你配置或安装的版本，所以需要将path中%JAVA_HOME%/bin;%JAVA_HOME%/jre/bin;调整到path配置的最前面。

错误PATH环境变量示例如下：

第二步：检查所有项目的字符编码php及jdk编译环境。

第三步：首先运行最大范围的pom.xml,执行maven clean、maven install命令。

然后再依次在hzz-parent、hzz-util、hzz-entity、hzz-core、hzz-web项目的pom.xml上执行maven clean、maven install命令即可。

maven加载依赖报错问题

出现的问题

无论是加载什么依赖，都报错大概是“Cannot reslove …”

在网上找了很久的解决方法，最后自己去检查IDEA中的maven的时候发现了问题：竟然Maven的setting.xml都无了，虽然不知道为啥没的，但是加上就好了

一、检查IDEA中的maven配置

尤其是注意那两个

二、添加对应setting.xml到上图目录中

三.setting.xml中写入配置

代码如下（示例）：

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a MAChine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
    <!-- localRepository
     | The path to the local repository maven will use to store artifacts.
     |
     | Default: ${user.home}/.m2/repository
    <localRepository>/path/to/local/repo</localRepository>
    -->
    <localRepository>C:\Users\14469\.m2\repository</localRepository>
    <!-- interactiveMode
     | This will determine whether maven prompts you when it needs input. If set to false,
     | maven will use a sensible default value, perhaps based on some other setting, for
     | the parameter in question.
     |
     | Default: true
    <interactiveMode>true</interactiveMode>
    -->

    <!-- offline
     | Determines whether maven should attempt to connect to the network when executing a build.
     | This will have an effect on artifact downloads, artifact deployment, and others.
     |
     | Default: false
    <offline>false</offline>
    -->

    <!-- pluginGroups
     | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
     | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
     | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
     |-->
    <pluginGroups>
        <!-- pluginGroup
         | Specifies a further group identifier to use for plugin lookup.
        <pluginGroup>com.your.plugins</pluginGroup>
        -->
    </pluginGroups>

    <!-- proxies
     | This is a list of proxies which can be used on this machine to connect to the network.
     | Unless otherwise specified (by system property or command-line switch), the first proxy
     | specification in this list marked as active will be used.
     |-->
    <proxies>
        <!-- proxy
         | Specification for one proxy, to be used in connecting to the network.
         |
        <proxy>
          <id>optional</id>
          <active>true</active>
          <protocol>http</protocol>
          <username>proxyuser</username>
          <pajsssword>proxypass</password>
          <host>proxy.host.net</host>
          <port>80</port>
          <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
        </proxy>
        -->
    </proxies>

    <!-- servers
     | This is a list of authentication profiles, keyed by the server-id used within the system.
     | Authentication profiles can be used whenever maven must make a connection to a remote server.
     |-->
    <servers>
        <!-- server
         | Specifies the authentication information to use when connecting to a particular server, identified by
         | a unique name within the system (referred to by the 'id' attribute below).
         |
         | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
         |       used together.
         |
        <server>
          <id>deploymentRepo</id>
          <username>repouser</username>
          <password>repopwd</password>
        </server>
        -->

        <!-- Another sample, using keys to authenticate.
        <server>
          <id>siteServer</id>
          <privateKey>/path/to/private/key</privateKey>
          <passphrase>optional; leave empty if not used.</passphrase>
        </server>
        -->
    </servers>

    <!-- mirrors
     | This is a list of mirrors to be used in downloading artifacts from remote repositories.
     |
     | It works like this: a POM may declare a repository to use in resolving certain artifacts.
     | However, this repository may have problems with heavy traffic at times, so people have mirrored
     | it to several places.
     |
     | That repository definition will have a unique id, so we can create a mirror reference for that
     | repository, to be used as an alternate download site. The mirror site will be the preferred
     | server for that repository.
     |-->
    <mirrors>
        <!-- mirror
         | Specifies a repository mirror site to use instead of a given repository. The repository that
         | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
         | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
         |
        <mirror>
          <id>mirrorId</id>
          <mirrorOf>repositoryId</mirrorOf>
          <name>Human Readable Name for this Mirror.</name>
          <url>http://my.repository.com/repo/path</url>
        </mirror>
         -->
        <!-- 阿里云仓库 -->
        <mirror>
            <id>alimaven</id>
            <mirrorOf>central</mirrorOf>
            <name>aliyun maven</name>
            <url>http://maven.aliyun.com/nexus/content/repositories/central/</url>
        </mirror>

        <!-- 中央仓库1 -->
        <mirror>
            <id>repo1</id>
            <mirrorOf>central</mirrorOf>
            <name>Human Readable Name for this Mirror.</name>
            <url>http://repo1.maven.org/maven2/</url>
        </mirror>

        <!-- 中央仓库2 -->
        <mirror>
            <id>repo2</id>
            <mirrorOf>central</mirrorOf>
            <name>Human Readable Name for this Mirror.</name>
            <url>http://repo2.maven.org/maven2/</url>
        </mirror>
    </mirrors>

    <!-- profiles
     | This is a list of profiles which can be activated in a variety of ways, and which can modify
     | the build process. Profiles provided in the settings.xml are intended to provide local machine-
     | specific paths and repository locations which allow the build to work in the local environment.
     |
     | For example, if you have an integration testing plugin - like cactus - that needs to know where
     | your Tomcat instance is installed, you can provide a variable here such that the variable is
     | dereferenced during the build process to configure the cactus plugin.
     |
     | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
     | section of this document (settings.xml) - will be discussed later. Another way essentially
     | relies on the detection of a system property, either matching a particular value for the property,
     | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
     | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
     | Finally, the list of active profiles can be specified directly from the command line.
     |
     | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
     |       repositories, plugin repositories, and free-form properties to be used as configuration
     |       variables for plugins in the POM.
     |
     |-->
    <profiles>
        <!-- profile
         | Specifies a set of introductions to the build process, to be activated using one phpor more of the
         | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
         | or the command line, profiles have to have an ID that is unique.
         |
         | An encouraged best practice for profile identification is to use a consistent naming convention
         | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
         | This will make it more intuitive to understand what the set of introduced profiles is attempting
         | to accomplish, particularly when you only have a list of profile id's for debug.
         |
         | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
        <profile>
          <id>jdk-1.4</id>

          <activation>
            <jdk>1.4</jdk>
          </activation>

          <repositories>
            <repository>
              <id>jdk14</id>
              <name>Repository for JDK 1.4 builds</name>
              <url>http://www.myhost.com/maven/jdk14</url>
              <layout>default</layout>
              <snapshotPolicy>always</snapshotPolicy>
            </repository>
          </repositories>
        </profile>
        -->

        <!--
         | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
         | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
         | might hypothetically look like:
         |
         | ...
         | <plugin>
         |   <groupId>org.myco.myplugins</groupId>
         |   <artifactId>myplugin</artifactId>
         |
         |   <configuration>
         |     <tomcatLocation>${tomcatPath}</tomcatLocation>
         |   </configuration>
         | </plugin>
         | ...
         |
         | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
         |       anything, you could just leave off the <value/> inside the activation-property.
         |
        <profile>
          <id>env-dev</id>

          <activation>
            <property>
              <name>target-env</name>
              <value>dev</value>
            </property>
          </activation>

          <properties>
            <tomcatPath>/path/to/tomcat/instance</tomcatPath>
          </properties>
        </profile>
        -->
        <profile>
            <id>JDK-1.8</id>
            <activation>
                <activeByDefault>true</activeByDefault>
                <jdk>1.8&l开发者_Python入门t;/jdk>
            </activation>
            <properties>
                <maven.compiler.source>1.8</maven.compiler.source>
                <maven.compiler.target>1.8</maven.compiler.target>
                <maven.compiler.compilerVersion>1.8</maven.compiler.compilerVersion>
            </properties>
        </profile>
    </profiles>

    <!-- activeProfiles
     | List of profiles that are active for all builds.
     |
    <activeProfiles>
      <activeProfile>alwaysActiveProfile</activeProfile>
      <activeProfile>anotherAlwaysActiveProfile</activeProfile>
    </activeProfiles>
    -->
</settings>

该处需要修改其中 <localRepository>C:\Users\14469\.m2\repository</localRepository> 这个里面的路径，根据自己的情况进行修改即可

总结

当百度很php久都找不到问题的时候，其实可以自己冷静一下，慢慢从源头开始排查。

以上为个人经验，希望能给大家一个参考，也希望大家多多支持我们。