ARM926EJ-S cycle-counter

Im using an ARM926EJ-S and am trying to figure out whether the ARM can give (e.g. a readable regis开发者_C百科ter) the CPU's cycle-counter. I guess a # that will represent the number of cycles since the CPU has been powered.

In my system i have only Low-Res external RTC/Timers. I would like to be able to achieve a Hi-Res timer.

Many thanks in advance!

You probably have only two choices:

• Use an instruction-cycle accurate simulator; the problem here is that effectively simulating peripherals and external stimulus can be complex or impossible.

• Use a peripheral hardware timer. In most cases you will not be able to run such a timer at the typical core clock rate of an ARM9, and there will be an over head in servicing the timer either side of the period being timed, but it can be used to give execution time over larger or longer running sections of code, which may be of more practical use than cycle count.

While cycle count may be somewhat scalable to different clock rates, it remains constrained by memory and I/O wait states, so is perhaps not as useful as it may seem as a performance metric, except at the micro-level of analysis, and larger performance gains are typically to be had by taking a wider view.

The arm-9 is not equipped with an PMU (Performance Monitoring Unit) as included in the Cortex-family. The PMU is described here. The linux kernel comes equipped with support for using the PMU for benchmarking performance. See here for documentation of the perf tool-set.

Bit unsure about the arm-9, need to dig a bit more...