I\'ve been searching for why for two hours. Now I\'m using IAR Embedded Workbench Evaluation 5.30 to debug on a CC430F6137 dev kit board. As I have declared some global static variable, I realize that
I\'m trying to figure out how to communicate with a bricked phone. Sometimes when custom firmware is flashed, it destroys the boot process.This leaves the device without the ability to naturally load
Ok, I am a little confused about programming for ARM processors. Barrage of questions time: How does one get the compiled binary into an ARM processor?
In my embedded project am using JTAG interface t开发者_如何学JAVAo download the code and to debug the downloaded application. But I don\'t know what is happening inside the JTAG set up.
When I use JTAG to load my C code to evaluation board, it loads successfully. However, when I executed my code from main(), I immediately got \"CPU is not halted\" error, followed by \"No APB-AP found
I have a Keil ULINK2USB emulator box attached to the JTAG connector on my board, which is working fine with the Cortex-M3 CPU onboard (TI/Stellaris/LuminaryMicro LM3S series). It seems that both a JTA
Closed. This question does not meet Stack Overflow guidelines. It is not c开发者_如何学JAVAurrently accepting answers.
I bought a Hawkboard and went looking for a JTAG emulator to use for debugging. The only one I seemed certain about was the Spectrum Digital XDS100v2, because the pins matched and I had read about oth
Does anyone knows of any resources regarding the debugging of BREW and/开发者_StackOverflow中文版or BMP applications on Qualcomm FFA using Lauterbach JTAG/Trace32 (e.g. .cmm scripts, instructions etc.
加载中,请稍侯......