I\'m using minicom to connect through a serial link to a target (UART link of a sparc processor). With gtkterm or cutecom, I can connect, read and send characters. The only issue with them is that the
I have a Delphi application that reads/writes to a COM port connected to a large hardware device, so I don\'t usually have the hardware available during development.That said, the communication protoc
Hey I\'m relatively new to Android programming (but not programming in general). The Setup: HTC Wildfire (running Android 2.1)
when I add CSerialPort files(SerialPort.h, SerialPort.cpp) into my QMake project, and compile it, IDE(vc2008) throw lots of errors, How could I deal with it?
I could connect to two devices from Android based cell phone simultaneously using SPP, but once I turn on the inputstream (like socket.getInputStream()), one of them will return 0 in the stream, that
I have some devices which read an RFID tage and pass the serial number of the tag over the serial port.
I am developing an Android app to connect to a simple device that supports the bluetooth serial port profile (SPP).I am able to successfully connect and exchange data, but each time I connect the user
on my Mac, i currently have the available serial ports: /dev/tty.usbserial-A700dYoR /dev/cu.usbserial-A700dYoR
I am trying to read data from a scale RS232 interface.It sends a continuous ASCII string stream through the Serial Port which I am having trouble getting.I just want to get one line of the data that i
I\'m looking for some input on witch file transfe开发者_C百科r protocol to use over a serial line. I want to be able to transfer files of max 200 Mb size over a serial line (RS232) in both directions,
加载中,请稍侯......