Using SDCC 3.0.0. Compiling this code #include <pic16f84.h> void main(void) { TRISA0=0; RA0=1; } and receive these warnings.
I have a function which is meant to catch all the interrupt calls that will happen, But I cannot get any function to start at address 04.
I have been searching workarounds for many days with no luck. PIC Simulator keeps telling me that the checksum of the hex file is wrong.
I am wondering if there is a better way to write this: void readtcp_c(unsigned char c) { volatile char *a;
The Small Device C Compiler (SDCC) will produce a ihx (Intel Hex) file even if there are undefined reference errors during the link step.This behavior causes problems when using SDCC in a Makefile bec
I\'m developing a software on 8051 processor. A frequent job is to divide the high and low byte of a 16bit address. I want to see there are how many ways to achieve it. The ways I come up so far are:
I am working on a program in C and usi开发者_运维知识库ng the SDCC compiler for a 8051 architecture device.
I am very new at C programming and I am working on a firmware application for my MCU. This method was working fine when I was using the KEIL compiler (Big Endian) but when I switched to the SDCC compi
I\'m trying to upload a compiled program to a microcontroller.. well 开发者_运维技巧my problem is not in programming or uploading things.. my problem is what to upload u.u
I need to use code banking in an 8051 microcontroller to fit all the code.SDCC says it supports it, but I\'m having trouble at the linking step.