I need to load 18h and output it to port 60h, following works (inside asm(\"\")). ldi r1, 0x18 ; 0x18 -> r1
I\'m trying to migrate an Arduino IDE based project to Eclipse. The project is prett开发者_如何学JAVAy big (10 .pde\'s, and about 20 libraries used). I followed the directions in Arduino playground -
What programming languages or environments ta开发者_JS百科rget Arduino or AVR besides the default C++ environment?
When creating a project in AVR Studio 5, it creates a .c file with following content: #include <avr/io.h>
I\'ve configured the timer 2 in CTC mode and to toggle the port pin on compare match (TCCR2A=0x42, TCCR2B=0x02, OCR2A=0x20) and have set DDR3 to output. Hence, according to the ATmega328P documentatio
Hi I\'m trying to get the SPI bus on a AtMega644 to talk to the ADXL345 accelerometer. I\'m always getting a 0 back and I\'m not where I\'m going wrong. Any help is appreciated. I\'m using avr-gcc and
I am using an ATmega32 to interrupt every 32ms to do some arbitrary stuff, which isn\'t really important for now.
It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical andcannot be reasonably answered in its current form. For help clari
I have an Arduino Duemilanove on which I would like to use the internal 16-bit timer to do PWM on pin 9 and not pin 10 (I have a Wifi shield in my project which requires the use of pin 10).
Following on from my other question, Help optimising this C (AVR) code? :), I just realised that I don\'t really know the mechanics of how to implement an ISR in assembly within my C program. I google
加载中,请稍侯......