In one of projects I have a file written in ARM assembly that uses NEON to optimize a calculation I am doing it. I also have a file that does the exact same thing except that it is written in C. Curre
I am having a hard time understanding some code I found for using a timer and interrupts on an ARM board I have. The timer basically toggles an LED every interrupt between on and off to make it flash.
I\'m trying to recreate the following piece of arm disassembly in c++: 00003188ed910a06fldss0, [r1, #24]
I\'m developing a device driver for embedded linux(ARM). How can I compile the KO file generated as a part of the kernel,
I have a Linux network driver that was originally written for 2.4 kernel. It works perfect. I want to port it to kernel 2.6.31 and then to ARM Linux with same kernel i.e. 2.6.31. I have actually done
Is it possible that I use .Net Micro Framework with a custom ARM9 or ARM7 board, and without any display device or input device?
Im rather new to assembly and although the arm information center is often helpful sometimes the instructions can be a little confusing to a newbie. Basically what I need to do is sum 4 float values i
Is there any GPIO interrupt available for STM32F103ZE? I went through the datasheet but didn\'t find anything related to that.
I just got my BeagleBoard-Xm and I\'m wondering if there is any detailed step by step tutorials on how to get a very simple bare metal software running on the hardware?
iPads run armv7, and if the app is only for iPad, it should be compiled for armv7 (optimized) architecture.
加载中,请稍侯......