详解redis-cli 命令

命令使用:

Redis-cli [OPTIONS] [cmd [arg [arg ...]]]

选项说明:

  -h <hostname>      Server hostname (default: 127.0.0.1). ip地址
  -p <port>          Server port (default: 6379).　服务器端口号
  -s <socket>        Server socket (overrides hostname and port).
  -a <password>      Password to use when connecting to the server.　密码
  -u <uri>          hLXQSkpsO Server URI.　url格式的地址
  -r <repeat>        Execute specified command N times.
  -i <interval>      When -r is used, waits <interval> seconds per command.
                     It is possible to specify sub-second times like -i 0.1.
  -n <db>            Database number.　指定数据库
  -x                 Read last argument from STDIN.
  -d <delimiter>     Multi-bulk delimiter in for raw formatting (default: \n).
  -c                 Enable cluster mode (follow -ASK and -MOVED redirections).
  --raw              Use raw formatting for replies (default when STDOUT is
                     not a tty).
  --no-raw           Force formatted output even when STDOUT is not a tty.
  --csv              Output in CSV format.
  --stat             Print rolling stats about server: mem, clients, ...　统计数据　连续输出
  --latency          Enter a special mode continuously sampling latency.
                     If you use this mode in an interactive session it runs
                     forever displaying real-time stats. Otherwise if --raw or
                     --csv is specified, or if you redirect the output to a non
                     TTY, it samples the latency for 1 second (you can use
                     -i to change the interval), then produces a single output
                     and exits.　延时统计
  --latency-history  Like --latency but tracking latency changes over time.
                     Default time interval is 15 sec. Change it using -i.
  --latency-dist     Shows latency as a spectrum, requires xterm 256 colors.
                     Default time interval is 1 sec. Change it using -i.
  --lru-test <keys>  Simulate a cache workload with an 80-20 distribution.
  --replica          Simulate a replica showing commands received from the master.
  --rdb <filename>   Transfer an RDB dump from remote server to local file. 导出rdb文件
  --pipe             Transfer raw Redis protocol from stdin to server.
  管道模式
  --pipe-timeout <n> In --pipe mode, abort with error if after sending all data.
                     no reply is received within <n> seconds.
                     Default timeout: 30. Use 0 to wait forever.
                     管道超时
  --bigkeys          Sample Redis k开发者_数据库教程eys looking for big keys.python
  --hotkeys          Sample Redis keys looking for hot keys.
                     only works when maxmemory-policy is *lfu.
  --scan             List all keys using the SCAN command.获取服务器所有的键
  --pattern <pat>    Useful with --scan to specify a SCAN pattern.
  正则表达式　用于scan命令中
  --intrinsic-latency <sec> Run a test to measure intrinsic system latency.
                     The test will run for the specified amount of seconds.
  --eval <file>      Send an EVAL command using the Lua script at <file>.
  --ldb              Used with --eval enable the Redis Lua debugger.
  --ldb-sync-mode    Like --ldb but uses the synchronous Lua debugger, in
                     this mode the server is blocked and script changes are
                     not rolled back from the server memory.
  --cluster <command> [args...] [opts...]
                     Cluster Manager command and arguments (see below).
  --verbose          Verbose mode.
  --no-auth-warning  Don't show warning message when using password on command
                     line interface.
 

注意：

-u  选项中url格式参考文档https://www.iana.org/assignments/uri-schemes/prov/redis　

格式为：redis://user:secret@localhost:6379/0?foo=bar&qux=baz

举例：

root@hylaz:~# redis-cli
127.0.0.1:6379> set name hylaz
OK
127.0.0.1:6379> quit
root@hylaz:~# redis-cli -h 127.0.0.1
127.0.0.1:6379> get name
"hylaz"
127.0.0.1:6379> select 6
127.0.0.1:6379[6]> 
 
root@hylaz:~# redis-cli -h 127.0.0.1 -p 6379 -n 2
127.0.0.1:6379[2]> get age
 

server中统计选项

root@hylaz:~# redis-cli --stat
------- data ------ --------------------- load -------------------- - child -
keys       mem      clients blocked requests            connections          
11         835.52K  1       0       12 (+0)             5           
11         835.52K  1       0       13 (+1)             5         
11         835.52K  1       0       14 (+1)             5           
11         835.52K  1       0       15 (+1)             5   

列表中选项说明：

使用info命令获取服务器的信息

导入rdb文件　命令：redis-cli --rdb rdb.log

root@hylaz:~# redis-cli --rdb rdb.log
SYNC sent to master, writing 344 bytes to 'javascriptrdb.log'
Transfer finished with success.

该命令选项实现：

• 向server发送SYNC命令，返回需要写的总字节数
• 从server读取总字节数据写到指定文件中

找出各种数据类型的最大键值对　

命令：redis-cli --big-keys

root@hylaz:~# redis-cli --bigkeys
 
# Scanning the entire keyspace to find biggest keys as well as
# average sizes per key type.  You can use -i 0.1 to sleep 0.1 sec
# per 100 SCAN commands (not usually needed).
 
[00.00%] Biggest string found so far 'name1' with 5 bytes
[00.00%] Biggest set    found so far 'myset' with 1 members
[00.00%] Biggest string found so far 'key' with 6 bytes
 
-------- summary -------
 
Sampled 13 keys in the keyspace!
Total key length in bytes is 52 (avg len 4.00)
 
Biggest string found 'key' has 6 bytes
Biggest    set found 'myset' has 1 members
 
12 strings with 33 bytes (92.31% of keys, avg size 2.75)
0 lists with 0 items (00.00% of keys, avg size 0.00)
1 sets with 1 members (07.69% of keys, avg size 1.00)
0 hashs with 0 fields (00.00% of keys, avg size 0.00)
0 zsets with 0 members (00.00% of keys, avg size 0.00)
0 streams with 0 entries (00.00% of keys, avg size 0.00)
 

该选项实现：通过使用scan命令遍历server中的键值对，针对不同数据类型进行统计，

找出server中热点key 命令：redis-cli --hotkeys

# Scanning the entire keyspace to find hot keys as well as
# average sizes per key type.  You can use -i 0.1 to sleep 0.1 sec
# per 100 SCAN commands (not usually needed).
 
[00.00%] Hot key 'dd' found so far with counter 4
[00.00%] Hot key 'myset' found so fawww.devze.comr with counter 5
[00.00%] Hot key 'javascripta' found so far with counter 5
[00.00%] Hot key 'dds' found so far with counter 4
[71.43%] Hot key 'aa' found so far with counter 4
[71.43%] Hot key 'key' found so far with counter 4
 
-------- summary -------
 
Sampled 14 keys in the keyspace!
hot key found with counter: 5	keyname: myset
hot key found with counter: 5	keyname: a
hot key found with counter: 4	keyname: dd
hot key found with counter: 4	keyname: dds
hot key found with counter: 4	keyname: aa
hot key found with counter: 4	keyname: key

选项实现：

1. redis实现8种缓存淘汰策略：

voltile-lru：从已设置过期时间的数据集（server.db[i].expires）中挑选最近最少使用的数据淘汰

volatile-ttl：从已设置过期时间的数据集（server.db[i].expires）中挑选将要过期的数据淘汰

volatile-random：从已设置过期时间的数据集（server.db[i].expires）中任意选择数据淘汰

volatile-lfu: 从已设置过期时间的数据集驱逐使用频率最少的键

allkeys-lru:从数据集（server.db[i].dict）中挑选最近最少使用的数据淘汰

allkeys-lfu: 从所有键中驱逐使用频率最少的键

allkeys-random：从数据集（server.db[i].dict）中任意选择数据淘汰

no-enviction（驱逐）：禁止驱逐数据 当内存不足以容纳新写入数据时，新写入操作会报错

需要设置淘汰策略为lru或者lfu

2. 命令实现使用scan命令遍历所有的键值对，针对每个键值对使用OBJECT freq 获取该键值对的信息

到此这篇关于redis-cli 命令详解的文章就介绍到这了,更多相关redis-cli 命令内容请搜索我们以前的文章或继续浏览下面的相关文章希望大家以后多多支持我们！