Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
I am getting the following error when I try to connect to mysql:
Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
Is t开发者_StackOverflowhere a solution for this error? What might be the reason behind it?
Are you connecting to "localhost" or "127.0.0.1" ? I noticed that when you connect to "localhost" the socket connector is used, but when you connect to "127.0.0.1" the TCP/IP connector is used. You could try using "127.0.0.1" if the socket connector is not enabled/working.
Ensure that your mysql service is running
service mysqld start
Then, try the one of the following following:
(if you have not set password for mysql)
mysql -u root
if you have set password already
mysql -u root -p
If your file my.cnf (usually in the etc folder) is correctly configured with
socket=/var/lib/mysql/mysql.sock
you can check if mysql is running with the following command:
mysqladmin -u root -p status
try changing your permission to mysql folder. If you are working locally, you can try:
sudo chmod -R 777 /var/lib/mysql/
that solved it for me
The MySQL server is not running, or that is not the location of its socket file (check my.cnf).
Most likely mysql.sock does not exist in /var/lib/mysql/.
If you find the same file in another location then symlink it:
For ex: I have it in /data/mysql_datadir/mysql.sock
Switch user to mysql and execute as mentioned below:
su mysql
ln -s /data/mysql_datadir/mysql.sock /var/lib/mysql/mysql.sock
That solved my problem
If you are on a recent RHEL, you may need to start mariadb (an open source mysql db) instead of the mysql db:
yum remove mysql
yum -y install mariadb-server mariadb
service mariadb start
You should then be able to access mysql in the usual fashion:
mysql -u root -p
Just edit /etc/my.cnf
Add following lines to my.cnf
[mysqld]
socket=/var/lib/mysql/mysql.sock
[client]
socket=/var/lib/mysql/mysql.sock
Restart mysql and connect again
mysql -u user -p password database -h host;
In my case I have moved socket file to another location inside /etc/my.cnf
from /var/lib/mysql/mysql.sock to /tmp/mysql.sock
Even after restarting the mysqld service, I still see the error message when I try to connect.
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
The problem is with the way that the client is configured. Running diagnostics will actually show the correct socket path. eg ps aux | grep mysqld
Works:
mysql -uroot -p -h127.0.0.1
mysql -uroot -p --socket=/tmp/mysql.sock
Does not Work:
mysql -uroot -p
mysql -uroot -p -hlocalhost
You can fix this problem by adding the same socket line under [client] section inside mysql config.
Check if your mysqld service is running or not, if not run, start the service.
If your problem isn't solved, look for /etc/my.cnf and modify as following, where you see a line starting with socket. Take a backup of that file before doing this update.
socket=/var/lib/mysql/mysql.sock
Change to
socket=/opt/lampp/var/mysql/mysql.sock -u root
MariaDB, a community developed fork of MySQL, has become the default implementation of MySQL in many distributions.
So first you should start,
$ sudo systemctl start mariadb
If this fails rather try,
$ sudo systemctl start mysqld
Then to start mysql,
$ mysql -u root -p
As of today, in Fedora the package is named mariadb
And in Ubuntu it is called mariadb-server.
So you may have to install it if its not already installed in your system.
Make sure you have enough space left in /var. If Mysql demon is not able to write additional info to the drive the mysql server won't start and it leads to the error Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
Consider using
expire_logs_days = 10
max_binlog_size = 100M
This will help you keep disk usage down.
Please check whether another mysql service is running.
Make sure you started the server:
mysql.server start
Then connect with root user:
mysql -uroot
Here's what worked for me:
ln -s /var/lib/mysql/mysql.sock /tmp/mysql.sock
service mysqld restart
One way to reproduce this error: If you meant to connect to a foreign server but instead connect to the non existent local one:
eric@dev ~ $ mysql -u dev -p
Enter password:
ERROR 2002 (HY000): Can't connect to local MySQL server through
socket '/var/lib/mysql/mysql.sock' (2)
eric@dev ~ $
So you have to specify the host like this:
eric@dev ~ $ mysql --host=yourdb.yourserver.com -u dev -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 235
Server version: 5.6.19 MySQL Community Server (GPL)
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+-------------------------+
| Database |
+-------------------------+
| information_schema |
| mysql |
| performance_schema |
+-------------------------+
3 rows in set (0.00 sec)
mysql> exit
Bye
eric@dev ~ $
If your mysql was previously working and has stopped suddenly just "reboot" the server.
Was facing this issue on my CentOS VPS.->
Was constantly getting
Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)
Tried all techniques, finally restarting the server fixed the issues ->
shutdown -r now
Hope this helps !!
try
echo 0 > /selinux/enforce
if you change files in /var/lib/mysql [ like copy or replace that ], you must set owner of files to mysql this is so important if mariadb.service restart has been faild
chown -R mysql:mysql /var/lib/mysql/*
chmod -R 700 /var/lib/mysql/*
First enter "service mysqld start" and login
It worked for me with the following changes
Whatever path for socket is mentioned in [mysqld] and same in [client] in my.cnf and restart mysql
[mysqld] socket=/var/lib/mysql/mysql.sock
[client] socket=/var/lib/mysql/mysql.sock
Please ensure you have installed MySQL server correctly, I met this error many times and I think it's complicated to debug from the socket, I mean it might be easier to reinstall it.
If you are using CentOS 7, here is the correct way to install it:
First of all, add the mysql community source
yum install http://dev.mysql.com/get/mysql-community-release-el7-5.noarch.rpm
Then you can install it by yum install mysql-community-server
Start it with systemctl: systemctl start mysqld
My problem was that I installed mysql successfully and it worked fine.
But one day, the same error occurred.
Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
And no mysql.sock file existed.
This sollution solved my problem and mysql was up and running again:
Log in as root:
sudo su -
Run:
systemctl stop mysqld.service
systemctl start mysqld.service
systemctl enable mysqld.service
Test as root:
mysql -u root -p
mysql should now be up and running.
I hope this can help someone else as well.
Note that while mysql reads the info of the location of the socketfile from the my.cnf file, the mysql_secure_installation program seems to not do that correctly at times.
So if you are like me and shuffle things around at installationtime you might get into the situation where you can connect to the database with mysql just fine, but the thing can not be secured (not using that script anyway).
To fix this the suggestion from sreddy works well: make a softlink from where the script would expect the socket to where it actually is. Example:
ln -s /tmp/mysql.sock /var/lib/mysql/mysql.sock
(I use /tmp/ as a default location for sockets)
This might be a stupid suggestion but make 100% sure your DB is still hosted at localhost. For example, if a Network Admin chose (or changed to) Amazon DB hosting, you will need that hostname instead!
In my case, I was importing a new database, and I wasnt able to connect again after that. Finally I realized that was a space problem.
So you can delete the last database and expand you hard drive or what I did, restored a snapshot of my virtual machine.
Just in case someone thinks that is useful
I came to this issue when i reinstall mariadb with yum, which rename my /etc/my.cnf.d/client.cnf to /etc/my.cnf.d/client.cnf.rpmsave but leave /etc/my.cnf unchanged.
For I has configed mysqld's socket in /etc/my.cnf, and mysql's socket in /etc/my.cnf.d/client.cnf with customized path.
So after the installation, mysql client cannot find the mysql's socket conf, so it try to use the default socket path to connect the msyqld, which will cause this issue.
Here are some steps to locate this isue.
- check if mysqld is running with
ps -aef | grep mysqld
$ps -aef | grep mysqld | grep -v grep
mysql 19946 1 0 09:54 ? 00:00:03 /usr/sbin/mysqld
- if mysqld is running, show what socket it use with
netstat -ln | grep mysql
$netstat -ln | grep mysql
unix 2 [ ACC ] STREAM LISTENING 560340807 /data/mysql/mysql.sock
- check if the socket is mysql client trying to connect. if not, edit /etc/my.conf.d/client.cnf or my.conf to make the socket same with it in mysqld
[client]
socket=/data/mysql/mysql.sock
You also can edit the mysqld's socket, but you need to restart or reload mysqld.
Just rain into the same problem -- and here's how I addressed it.
Assuming mysqld is running, then the problem might just be the mysql client not knowing where to look for the socket file.
The most straightforward way to address this consists in adding the following line to your user's profile .my.cnf file (on linux that's usually under /home/myusername):
socket=<path to the mysql socket file>
If you don't have a .my.cnf file there, then create one containing the following:
[mysql]
socket=<path to the mysql socket file>
In my case, since I moved the mysql default data folder (/var/lib/mysql) in a different location (/data/mysql), I added to .my.cnf the following:
[mysql]
socket=/data/mysql/mysql.sock
Hope this helps.
ran into this issue while trying to connect mysql in SSH client, found adding the socket path to the command helpful when switching between sockets is necessary.
> mysql -u user -p --socket=/path/to/mysql5143.sock
This is a problem if you are running out of disk space. Solution is to free some space from the HDD.
Please read more to have the explanation :
If you are running MySQL at LINUX check the free space of HDD with the command disk free :
df
if you are getting something like that :
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 5162828 4902260 0 100% /
udev 156676 84 156592 1% /dev
/dev/sda3 3107124 70844 2878444 3% /home
Then this is the problem and now you have the solution!
Since mysql.sock wants to be created at the mysql folder which is almost always under the root folder could not achieve it because lack of space.
If you are periodicaly give the ls command under the mysql directory (at openSUSE 11.1 is at /var/lib/mysql) you will get something like :
hostname:/var/lib/mysql #
.protected IT files ibdata1 mysqld.log systemtemp
.tmp NEWS greekDB mysql mysqld.pid test
ARXEIO TEMP1 ib_logfile0 mysql.sock polis
DATING deisi ib_logfile1 mysql_upgrade_info restore
The mysql.sock file appearing and disappearing often (you must to try allot with the ls to hit a instance with the mysql.sock file on folder).
This caused by not enough disk space.
I hope that i will help some people!!!! Thanks!
I had to disable explicit_defaults_for_timestamp from my.cnf.
加载中,请稍侯......
精彩评论