CodeGolf: Brothers
I just finished participating in the 2009 ACM ICPC Programming Conest in the Latinamerican Finals. These questions were for Brazil, Bolivia, Chile, etc.
My team and I could only finish two questions out of the eleven (not bad I think for the first try).
Here's one we could finish. I'm curious to seeing any variations to the code. The question in full: ps: These questions can also be found on the official ICPC website available to everyone.
In the land of ACM ruled a greeat king who became obsessed with order. The kingdom had a rectangular form, and the king divided the territory into a grid of small rectangular counties. Before dying the king distributed the counties among his sons.
The king was unaware of the rivalries between his sons: The first heir hated the second but not the rest, the second hated the third but not the rest, and so on...Finally, the last heir hated the first heir, but not the other heirs.
As soon as the king died, the strange rivaly among the King's sons sparked off a generalized war in the kingdom. Attacks only took place between pairs of adjacent counties (adjacent counties are those that share one vertical or horizontal border). A county X attacked an adjacent county Y whenever X hated Y. The attacked county was always conquered. All attacks where carried out simultanously and a set of simultanous attacks was called a battle. After a certain number of battles, the surviving sons made a truce and never battled again.
For example if the king had three sons, named 0, 1 and 2, the figure below shows what happens in the first battle for a given initial land distribution:
INPUT
The input contains several test cases. The first line of a test case contains four integers, N, R, C and K.
- N - The number of heirs (2 <= N <= 100)
- R and C - The dimensions of the land. (2 <= R,C <= 100)
- K - Number of battles that are going to take place. (1 <= K <= 100)
Heirs are identified by sequential integers starting from zero. Each of the next R lines contains C integers HeirIdentificationNumber (saying what heir owns this land) separated by single spaces. This is to layout the initial land.
The last test case is a line separated by four zeroes separated by single spaces. (To exit the program so to speak)
Output
For each test case your program must print R lines with C integers each, separated by single spaces in the same format as the input, representing the land distribution after all battles.
Sample Input: Sample Output:
3 4 4 3 2 2 2 0
0 1 2 0 2 1 0 1
1 0 2 0 2 2 2 0
0 1 2 0 0 2 0 0
0 1 2 2
Another example:
Sample Input: Sample Output:
4 2 3 4 1 0 3
1 0 3 2 1 2
2 1 2
Perl, 233 char
{$_=<>;($~,$R,$C,$K)=split;if($~){@A=map{$_=<>;split}1..$R;$x=0,
@A=map{$r=0;for$d(-$C,$C,1,-1){$r|=($y=$x+$d)>=0&$y<@A&1==($_-$A[$y])%$~
if($p=(1+$x)%$C)>1||1-$d-2*$p}$x++;($_-$r)%$~}@A
while$K--;print"@a\n"while@a=splice@A,0,$C;redo}}
The map is held in a one-dimensional array. This is less elegant than the two-dimensional solution, but it is also shorter. Contains the idiom @A=map{...}@A where all the fighting goes on inside the braces.
Python (420 characters)
I haven't played with code golf puzzles in a while, so I'm sure I missed a few things:
import sys
H,R,C,B=map(int,raw_input().split())
M=(1,0), (0,1),(-1, 0),(0,-1)
l=[map(int,r.split())for r in sys.stdin]
n=[r[:]for r in l[:]]
def D(r,c):
x=l[r][c]
a=[l[r+mr][c+mc]for mr,mc in M if 0<=r+mr<R and 0<=c+mc<C]
if x==0and H-1in a:n[r][c]=H-1
elif x-1in a:n[r][c]=x-1
else:n[r][c]=x
G=range
for i in G(B):
for r in G(R):
for c in G(C):D(r,c)
l=[r[:] for r in n[:]]
for r in l:print' '.join(map(str,r))
Lua, 291 Characters
g=loadstring("return io.read('*n')")repeat n=g()r=g()c=g()k=g()l={}c=c+1 for
i=0,k do w={}for x=1,r*c do a=l[x]and(l[x]+n-1)%n w[x]=i==0 and x%c~=0 and
g()or(l[x-1]==a or l[x+1]==a or l[x+c]==a or l[x-c]==a)and a or
l[x]io.write(i~=k and""or x%c==0 and"\n"or w[x].." ")end l=w end until n==0
F#, 675 chars
let R()=System.Console.ReadLine().Split([|' '|])|>Array.map int
let B(a:int[][]) r c g=
let n=Array.init r (fun i->Array.copy a.[i])
for i in 1..r-2 do for j in 1..c-2 do
let e=a.[i].[j]-1
let e=if -1=e then g else e
if a.[i-1].[j]=e||a.[i+1].[j]=e||a.[i].[j-1]=e||a.[i].[j+1]=e then
n.[i].[j]<-e
n
let mutable n,r,c,k=0,0,0,0
while(n,r,c,k)<>(0,2,2,0)do
let i=R()
n<-i.[0]
r<-i.[1]+2
c<-i.[2]+2
k<-i.[3]
let mutable a=Array.init r (fun i->
if i=0||i=r-1 then Array.create c -2 else[|yield -2;yield!R();yield -2|])
for j in 1..k do a<-B a r c (n-1)
for i in 1..r-2 do
for j in 1..c-2 do
printf "%d" a.[i].[j]
printfn ""
Make the array big enough to put an extra border of "-2" around the outside - this way can look left/up/right/down without worrying about out-of-bounds exceptions.
B() is the battle function; it clones the array-of-arrays and computes the next layout. For each square, see if up/down/left/right is the guy who hates you (enemy 'e'), if so, he takes you over.
The main while loop just reads input, runs k iterations of battle, and prints output as per the spec.
Input:
3 4 4 3
0 1 2 0
1 0 2 0
0 1 2 0
0 1 2 2
4 2 3 4
1 0 3
2 1 2
0 0 0 0
Output:
2220
2101
2220
0200
103
212
Python 2.6, 383 376 Characters
This code is inspired by Steve Losh' answer:
import sys
A=range
l=lambda:map(int,raw_input().split())
def x(N,R,C,K):
if not N:return
m=[l()for _ in A(R)];n=[r[:]for r in m]
def u(r,c):z=m[r][c];n[r][c]=(z-((z-1)%N in[m[r+s][c+d]for s,d in(-1,0),(1,0),(0,-1),(0,1)if 0<=r+s<R and 0<=c+d<C]))%N
for i in A(K):[u(r,c)for r in A(R)for c in A(C)];m=[r[:]for r in n]
for r in m:print' '.join(map(str,r))
x(*l())
x(*l())
Haskell (GHC 6.8.2), 570 446 415 413 388 Characters
Minimized:
import Monad
import Array
import List
f=map
d=getLine>>=return.f read.words
h m k=k//(f(\(a@(i,j),e)->(a,maybe e id(find(==mod(e-1)m)$f(k!)$filter(inRange$bounds k)[(i-1,j),(i+1,j),(i,j-1),(i,j+1)])))$assocs k)
main=do[n,r,c,k]<-d;when(n>0)$do g<-mapM(const d)[1..r];mapM_(\i->putStrLn$unwords$take c$drop(i*c)$f show$elems$(iterate(h n)$listArray((1,1),(r,c))$concat g)!!k)[0..r-1];main
The code above is based on the (hopefully readable) version below. Perhaps the most significant difference with sth's answer is that this code uses Data.Array.IArray instead of nested lists.
import Control.Monad
import Data.Array.IArray
import Data.List
type Index = (Int, Int)
type Heir = Int
type Kingdom = Array Index Heir
-- Given the dimensions of a kingdom and a county, return its neighbors.
neighbors :: (Index, Index) -> Index -> [Index]
neighbors dim (i, j) =
filter (inRange dim) [(i - 1, j), (i + 1, j), (i, j - 1), (i, j + 1)]
-- Given the first non-Heir and a Kingdom, calculate the next iteration.
iter :: Heir -> Kingdom -> Kingdom
iter m k = k // (
map (\(i, e) -> (i, maybe e id (find (== mod (e - 1) m) $
map (k !) $ neighbors (bounds k) i))) $
assocs k)
-- Read a line integers from stdin.
readLine :: IO [Int]
readLine = getLine >>= return . map read . words
-- Print the given kingdom, assuming the specified number of rows and columns.
printKingdom :: Int -> Int -> Kingdom -> IO ()
printKingdom r c k =
mapM_ (\i -> putStrLn $ unwords $ take c $ drop (i * c) $ map show $ elems k)
[0..r-1]
main :: IO ()
main = do
[n, r, c, k] <- readLine -- read number of heirs, rows, columns and iters
when (n > 0) $ do -- observe that 0 heirs implies [0, 0, 0, 0]
g <- sequence $ replicate r readLine -- read initial state of the kingdom
printKingdom r c $ -- print kingdom after k iterations
(iterate (iter n) $ listArray ((1, 1), (r, c)) $ concat g) !! k
main -- handle next test case
AWK - 245
A bit late, but nonetheless... Data in a 1-D array. Using a 2-D array the solution is about 30 chars longer.
NR<2{N=$1;R=$2;C=$3;K=$4;M=0}NR>1{for(i=0;i++<NF;)X[M++]=$i}END{for(k=0;k++<K;){
for(i=0;i<M;){Y[i++]=X[i-(i%C>0)]-(b=(N-1+X[i])%N)&&X[i+((i+1)%C>0)]-b&&X[i-C]-b
&&[i+C]-b?X[i]:b}for(i in Y)X[i]=Y[i]}for(i=0;i<M;)printf"%s%d",i%C?" ":"\n",
X[i++]}
加载中,请稍侯......
精彩评论