Sort N numbers in digit order

Given a N number range E开发者_JAVA百科.g. [1 to 100], sort the numbers in digit order (i.e) For the numbers 1 to 100, the sorted output wound be 1 10 100 11 12 13 . . . 19 2 20 21..... 99

This is just like Radix Sort but just that the digits are sorted in reversed order to what would be done in a normal Radix Sort.

I tried to store all the digits in each number as a linked list for faster operation but it results in a large Space Complexity.

I need a working algorithm for the question.

From all the answers, "Converting to Strings" is an option, but is there no other way this can be done? Also an algorithm for Sorting Strings as mentioned above can also be given.

Use any sorting algorithm you like, but compare the numbers as strings, not as numbers. This is basically lexiographic sorting of regular numbers. Here's an example gnome sort in C:

#include <stdlib.h>
#include <string.h>

void sort(int* array, int length) {
    int* iter = array;
    char buf1[12], buf2[12];
    while(iter++ < array+length) {
        if(iter == array || (strcmp(itoa(*iter, &buf1, 10), itoa(*(iter-1), &buf2, 10) >= 0) {
            iter++;
        } else {
            *iter ^= *(iter+1);
            *(iter+1) ^= *iter;
            *iter ^= *(iter+1);
            iter--;
        }
    }
}

Of course, this requires the non-standard itoa function to be present in stdlib.h. A more standard alternative would be to use sprintf, but that makes the code a little more cluttered. You'd possibly be better off converting the whole array to strings first, then sort, then convert it back.

Edit: For reference, the relevant bit here is strcmp(itoa(*iter, &buf1, 10), itoa(*(iter-1), &buf2, 10) >= 0, which replaces *iter >= *(iter-1).

I have a solution but not exactly an algorithm.. All you need to do is converts all the numbers to strings & sort them as strings..

Here is how you can do it with a recursive function (the code is in Java):

void doOperation(List<Integer> list, int prefix, int minimum, int maximum) {
    for (int i = 0; i <= 9; i++) {
        int newNumber = prefix * 10 + i;
        if (newNumber >= minimum && newNumber <= maximum) {
            list.add(newNumber);
        }
        if (newNumber > 0 && newNumber <= maximum) {
            doOperation(list, newNumber, minimum, maximum);
        }
    }
}

You call it like this:

List<Integer> numberList = new ArrayList<Integer>();
int min=1, max =100;
doOperation(numberList, 0, min, max);
System.out.println(numberList.toString());

EDIT:

I translated my code in C++ here:

#include <stdio.h> 

void doOperation(int list[], int &index, int prefix, int minimum, int maximum) {
    for (int i = 0; i <= 9; i++) {
        int newNumber = prefix * 10 + i;
        if (newNumber >= minimum && newNumber <= maximum) {
            list[index++] = newNumber;
        }
        if (newNumber > 0 && newNumber <= maximum) {
            doOperation(list, index, newNumber, minimum, maximum);
        }
    }
}

int main(void) { 
        int min=1, max =100;
        int* numberList = new int[max-min+1];
        int index = 0;
        doOperation(numberList, index, 0, min, max);
        printf("["); 
        for(int i=0; i<max-min+1; i++) {
                printf("%d ", numberList[i]); 
        }
        printf("]"); 
        return 0; 
}

Basically, the idea is: for each digit (0-9), I add it to the array if it is between minimum and maximum. Then, I call the same function with this digit as prefix. It does the same: for each digit, it adds it to the prefix (prefix * 10 + i) and if it is between the limits, it adds it to the array. It stops when newNumber is greater than maximum.

i think if you convert numbers to string, you can use string comparison to sort them. you can use anny sorting alghorighm for it.

"1" < "10" < "100" < "11" ...

Optimize the way you are storing the numbers: use a binary-coded decimal (BCD) type that gives simple access to a specific digit. Then you can use your current algorithm, which Steve Jessop correctly identified as most significant digit radix sort.

I tried to store all the digits in each number as a linked list for faster operation but it results in a large Space Complexity.

Storing each digit in a linked list wastes space in two different ways:

1. A digit (0-9) only requires 4 bits of memory to store, but you are probably using anywhere from 8 to 64 bits. A char or short type takes 8 bits, and an int can take up to 64 bits. That's using 2X to 16X more memory than the optimal solution!
2. Linked lists add additional unneeded memory overhead. For each digit, you need an additional 32 to 64 bits to store the memory address of the next link. Again, this increases the memory required per digit by 8X to 16X.

A more memory-efficient solution stores BCD digits contiguously in memory:

1. BCD only uses 4 bits per digit.
2. Store the digits in a contiguous memory block, like an array. This eliminates the need to store memory addresses. You don't need linked lists' ability to easily insert/delete from the middle. If you need the ability to grow the numbers to an unknown length, there are other abstract data types that allow that with much less overhead. For example, a vector.

One option, if other operations like addition/multiplication are not important, is to allocate enough memory to store each BCD digit plus one BCD terminator. The BCD terminator can be any combination of 4 bits that is not used to represent a BCD digit (like binary 1111). Storing this way will make other operations like addition and multiplication trickier, though.

Note this is very similar to the idea of converting to strings and lexicographically sorting those strings. Integers are internally stored as binary (base 2) in the computer. Storing in BCD is more like base 10 (base 16, actually, but 6 combinations are ignored), and strings are like base 256. Strings will use about twice as much memory, but there are already efficient functions written to sort strings. BCD's will probably require developing a custom BCD type for your needs.

Edit: I missed that it's a contiguous range. That being the case, all the answers which talk about sorting an array are wrong (including your idea stated in the question that it's like a radix sort), and True Soft's answer is right.

just like Radix Sort but just that the digits are sorted in reversed order

Well spotted :-) If you actually do it that way, funnily enough, it's called an MSD radix sort.

http://en.wikipedia.org/wiki/Radix_sort#Most_significant_digit_radix_sorts

You can implement one very simply, or with a lot of high technology and fanfare. In most programming languages, your particular example faces a slight difficulty. Extracting decimal digits from the natural storage format of an integer, isn't an especially fast operation. You can ignore this and see how long it ends up taking (recommended), or you can add yet more fanfare by converting all the numbers to decimal strings before sorting.

Of course you don't have to implement it as a radix sort: you could use a comparison sort algorithm with an appropriate comparator. For example in C, the following is suitable for use with qsort (unless I've messed it up):

int lex_compare(void *a, void *b) {
    char a_str[12];  // assuming 32bit int
    char b_str[12];
    sprintf(a_str, "%d", *(int*)a);
    sprintf(b_str, "%d", *(int*)b);
    return strcmp(a_str,b_str);
}

Not terribly efficient, since it does a lot of repeated work, but straightforward.

If you do not want to convert them to strings, but have enough space to store an extra copy of the list I would store the largest power of ten less than the element in the copy. This is probably easiest to do with a loop. Now call your original array x and the powers of ten y.

int findPower(int x) {
   int y = 1;
   while (y * 10 < x) {
      y = y * 10;
   }
   return y;
}

You could also compute them directly

y = exp10(floor(log10(x)));

but I suspect that the iteration may be faster than the conversions to and from floating point.

In order to compare the ith and jth elements

bool compare(int i, int j) {
  if (y[i] < y[j]) {
    int ti = x[i] * (y[j] / y[i]);
    if (ti == x[j]) {
      return (y[i] < y[j]);  // the compiler will optimize this
    } else {
      return (ti < x[j]);
    }
  } else if (y[i] > y[j]) {
    int tj = x[j] * (y[i] / y[j]);
    if (x[i] == tj) {
      return (y[i] < y[j]);  // the compiler will optimize this
    } else {
      return (x[i] < tj);
    }
  } else {
     return (x[i] < x[j];
  }
}

What is being done here is we are multiplying the smaller number by the appropriate power of ten to make the two numbers have an equal number of digits, then comparing them. if the two modified numbers are equal, then compare the digit lengths.

If you do not have the space to store the y arrays you can compute them on each comparison.

In general, you are likely better off using the preoptimized digit conversion routines.