Can two Identical devices be present on the same bus in any PCI Topology

As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. Ho开发者_JAVA技巧w will the PCI Software Subsystem distinguish between the two?

If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

Yes, it's perfectly fine. The host distinguishes identical devices by slot.

PCI and PCI Express devices are identified by Bus/Device/Function, which is necessarily unique per device in the system. Vendor and Device ID are just properties of a device found at a certain Bus/Device/Function.

When enumerating board, a driver will typically scan PCI configuration space (iterate through all the installed PCI devices), until it finds one or more devices that match the expected Vendor and Device ID, and possibly also the subsystem IDs. Once it finds a match, it should record the bus/device/function as a "handle" to the open device.

Properly written software should find all vendor/device matches, put them in a table, and let you pick which one you want to use (e.g. /dev/mydevice0, /dev/mydevice1, etc). However, I have seen lazy software that simply stops at the first match.

As I know, each PCI device can be uniquely described by (Bus,Device,Function). Consider your case(2 devices have identical VID and DID installed) and I think they must be located at different PCI bus ! If they must be in the same bus then please make their Device or Function number different