开发者

convert 24bit RGB to ARGB16

I have to read a 24bpp Bitmap and convert each pixel from RGB24 to ARGB16.

I used the following code,

#define ARGB16(a, r, g, b) ( ((a) << 15) | (r)|((g)<<5)|((b)<<10))

But I am not getting the req开发者_运维问答uired Output.

Any help would be highly appreciated.


Break it up. Let's continue to use macros:

#define TRUNCATE(x)  ((x) >> 3)

#define ARGB16(a,r,g,b) ((a << 15) | (TRUNCATE(r) << 10) | (TRUNCATE(g) << 5) | TRUNCATE(b)))

This assumes the alpha is just a single bit.


Since the RGB values are probably 8 bits each, you still need to truncate them to five bits so they won't "overlap" in the ARGB16 value.

The easiest way to truncate them is probably to bitshift them to the right by three places.


It looks to me like you probably want to mask off the bits you don't need from r, g and b. Maybe something like this:

#define ARGB16(a, r, g, b) ( ((a) << 15) | (r>>3)|((g>>3)<<5)|((b>>3)<<10))

Edit: whoops, I think the answer by Michael Buddingh is probably right - you'll want to shift off, this gets you the most significant bits.


I would either use a bitmask to get rid of the bits you don't need: (colorvalue & 0x1F).

Either shift the color value to the right 3 bits (seems like the better option).

And is a << 15 really what you need? You would be relying on the fact that the 0 bit is 0 or 1 to set the alpha bit on or off. So if your alpha value is 0xFE then the alpha bit would 0, whereas if it were 0x01 it would be 1.


You might to want to SCALE rather than TRUNCAT.

Take R component for example , 0xDE(222) in 24bit RGB will become 0x1A = (222.0/0xFF)*0x1F in 16bit RGB.


i have the code bellow :

    FILE *inFile;
BmpHeader header;
BmpImageInfo info;
Rgb *palette;
int i = 0;

    inFile = fopen( "red.bmp", "rb" );

fread(&header, 1, sizeof(BmpHeader), inFile);
fread(&info, 1, sizeof(BmpImageInfo), inFile);

palette = (Rgb*)malloc(sizeof(Rgb) * info.numColors);

fread(palette, sizeof(Rgb), info.numColors, inFile);

unsigned char buffer[info.width*info.height];

FILE *outFile = fopen( "red.a", "wb" );
Rgb *pixel = (Rgb*) malloc( sizeof(Rgb) );

int read, j;

for( j=info.height; j>0; j-- ) 
{
    for( i=0; i<info.width; i++ ) 
    {
        fread(pixel, 1, sizeof(Rgb), inFile);
        buffer[i] = ARGB16(0, pixel->red, pixel->green, pixel->blue);
    }
}

    fwrite(buffer, 1, sizeof(buffer), outFile);

and i am reading a red image(255 0 0), and i am using the function defined by you above(#define ARGB16(a, r, g, b) ( ((a) << 15) | (r>>3)|((g>>3)<<5)|((b>>3)<<10)) ), but the output file shows me : 1F 1F 1F when i am opening the file with a hexaeditor instead of 7C00 ..

0

上一篇:

下一篇:

精彩评论

暂无评论...
验证码 换一张
取 消

最新问答

问答排行榜