LaTex, align alignment characters between align blocks

I would like to align two alignment characters between two align blocks so that I can have some text in the middle of a derivation with equations maintaining the horizontal alignment. For example the following excerpt of latex using align

\begin{align*}
    \frac{\delta \phi}{\delta x_1} = {} &\frac{9}{8}\frac{\delta_1\phi}{\delta_1x_1}-\frac{1}{8}\frac{\delta_3\phi}{\delta_3x_1} \\
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{ali开发者_如何转开发gn*}
some text in the middle
\begin{align*}
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{align*}

Ideally I would like the left of the equation in the second block to line up with that of the second equation in the first block. I could do a workaround by not having text in the middle, however, I would like this functionality.

EDIT

I would like to have a good amount of text between. Say three to four lines that line up as normal paragraphs. Adding text in the alignment block is the workaround I poorly alluded to.

There is a very convenient command:

\begin{align*}
    \int_0^1 x^2 &= \frac{1}{3} \\
    \intertext{I am the intertext. I am typesetted as normal text but dude, 
               the tabbing/alignment is carried over to the next slide. 
               Check it out!}
    \int_0^1 x^3 &= \frac{1}{4}
\end{align*}

It's described in the ams userguide as far as I remember. But then, I also only discovered it very recently.

Use \noalign:

\begin{align*} 
    \frac{\delta \phi}{\delta x_1} = {} &\frac{9}{8}\frac{\delta_1\phi}{\delta_1x_1}-\frac{1}{8}\frac{\delta_3\phi}{\delta_3x_1} \\ 
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]\\ 
    \noalign{\noindent some text in the middle.}
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right] 
\end{align*} 

Try the following:

\begin{align*}
    \frac{\delta \phi}{\delta x_1} = {} &\frac{9}{8}\frac{\delta_1\phi}{\delta_1x_1}-\frac{1}{8}\frac{\delta_3\phi}{\delta_3x_1} \\
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]\\
    & \mbox{some text in the middle} \\
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{align*}

If you have lots of text, you probably want to use \phantom:

\begin{align*}
    \frac{\delta \phi}{\delta x_1} = {} &\frac{9}{8}\frac{\delta_1\phi}{\delta_1x_1}-\frac{1}{8}\frac{\delta_3\phi}{\delta_3x_1} \\
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{align*}
Some text in the middle, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text,
\begin{align*}
    \phantom{\frac{\delta \phi}{\delta x_1} = {}} & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{align*}

If you don't want to use \phantom, the only solution I can come up with is the following:

\usepackage{multirow}
....
\begin{document}
\[ \begin{array}{rl}
        \frac{\delta \phi}{\delta x_1} = {} &\frac{9}{8}\frac{\delta_1\phi}{\delta_1x_1}-\frac{1}{8}\frac{\delta_3\phi}{\delta_3x_1} \\
        & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]\\[5mm]
\multicolumn{2}{l}{\parbox{\linewidth}{Some text in the middle, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text, more text}}\\[1cm]
        & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{array} \]
\end{document}

I don't think there is a straight forward way of "linking up" the width of one column of one table / eqnarray / align with another.

If you don't have to much text, you can use the \text command from the math environment to display your text inside a single align* environment.

\begin{align*}
    \frac{\delta \phi}{\delta x_1} = {} &\frac{9}{8}\frac{\delta_1\phi}{\delta_1x_1}-\frac{1}{8}\frac{\delta_3\phi}{\delta_3x_1} \\
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]\\
    \text{some text in the middle.}\\
    & \frac{9}{8}\frac{1}{h_1}\left[\phi(x_1+h_1/2)-\phi(x_i-h_1/2)\right]-\frac{1}{8}\frac{1}{3h_1}\left[\phi(x_i+3h_1/2)-\phi(x_1-3h_1/2)\right]
\end{align*}