Build static Graphviz libraries for iOS

I am trying build the static libraries for Graphviz to include them in in an iOS app, but I can't get it to work. Here's what I have done so far, using graphviz 2.28.0], Xcode 4.1, OSX 10.7 and I am targeting the iOS simulator.

I found Glen Low's configure instructions, and with some informed guesswork updated these to:

./configure --build=i486-apple-dar开发者_C百科win --host=arm-apple-darwin9 --disable-dependency-tracking --enable-shared=no --enable-static=yes --enable-ltdl-install=no --enable-ltdl=no --enable-swig=no --enable-tcl=no --with-codegens=no --with-fontconfig=no --with-freetype2=no --with-ipsepcola=yes --with-libgd=no --with-quartz=yes --with-visio=yes --with-x=no --with-cgraph=no CC="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2" CPP="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -E" CXX="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/g++-4.2" CXXCPP="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/g++-4.2 -E" OBJC="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2" LD="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld" CPPFLAGS="-arch armv6 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.3.sdk -miphoneos-version-min=4.0" CXXCPPFLAGS="-arch armv6 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.3.sdk -miphoneos-version-min=4.0"

This works, but then the "make" runs for a while and errors out with:

Making all in gvpr
  CCLD   mkdefs
ld: warning: ignoring file mkdefs.o, file was built for armv6 which is not the architecture being linked (i386)
ld: warning: ignoring file /usr/local/lib/libSystem.dylib, missing required architecture i386 in file
ld: warning: symbol dyld_stub_binder not found, normally in libSystem.dylib
Undefined symbols for architecture i386:
  "_exit", referenced from:
      start in crt1.10.6.o
  "_main", referenced from:
      start in crt1.10.6.o
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
make[3]: *** [mkdefs] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

I don't quite understand all the architecture specifications, so any help to get this to work is most welcome.

Problem is imo that mkdefs is executed during the build process itself after it was created. So if you build for armv6 or armv7 the file can't be executed on the command line of Mac OS X. My workaround was to build a mkdefs for architecture i386 (which is needed for the iPhone simulator too) and copy it in the lib/gvpr directory after getting this error. Make sure that the file could not be overwritten and restart the build.

I got this working. The build script fails at the end when it tried to make an executable since it's compiled for i386 instead of x86 or x86_64 but all the libraries build just fine.

# For iPhoneOS
export DEV_iOS=/Developer/Platforms/iPhoneOS.platform/Developer
export SDK_iOS=${DEV_iOS}/SDKs/iPhoneOS5.0.sdk
export COMPILER_iOS=${DEV_iOS}/usr/bin
export CC=${COMPILER_iOS}/gcc
export CXX=${COMPILER_iOS}/g++
export LDFLAGS="-arch armv7 -pipe -Os -gdwarf-2 -no-cpp-precomp -mthumb -isysroot ${SDK_iOS}"
export CFLAGS=${LDFLAGS}
export CXXFLAGS=${LDFLAGS}
export LD=${COMPILER_iOS}/ld
export CPP=${COMPILER_iOS}/llvm-cpp-4.2
export AR=${COMPILER_iOS}/ar
export AS=${COMPILER_iOS}/as
export NM=${COMPILER_iOS}/nm
export CXXCPP=${COMPILER_iOS}/llvm-cpp-4.2
export RANLIB=${COMPILER_iOS}/ranlib

./configure --host=arm-apple-darwin11 --disable-dependency-tracking --enable-shared=no --enable-static=yes --enable-ltdl-install=no --enable-ltdl=no --enable-swig=no --enable-tcl=no --with-codegens=no --with-fontconfig=no --with-freetype2=no --with-ipsepcola=yes --with-libgd=no --with-quartz=yes --with-visio=yes --with-x=no --with-cgraph=no

It appears that the linker is trying to link to the system libraries installed on your Mac. Those libraries are all going to be compiled for i386 or x86_64 which isn't going to work when compiling libraries for iPhone. You'll need to reconfigure the linker to link against the libraries that come in the iPhone SDK.

It should also be noted that you will probably have to compile the library twice - once as armv6 and again as armv7. iPhone 3G and some of the older iPod Touches use the armv6 architecture, while newer iPhones use the armv7 architecture. After you've compiled the libraries under both architectures you can use lipo (type "man lipo" in your Terminal for more info) to create a single static library with both architectures in it. If you are going to develop your app using the iPhone/iPad simulator, then I also suggest compiling once as i386 so that you can use your library with the simulator. Again, lipo can create a single static library with all 3 architectures in it.

Now the GraphViz website appears to be unreachable at the moment, so I could not download the library and run the configure script like you did, but I suspect that before you run "make" you should make the following changes to the makefile that is produced by the configure script. Depending on which version of the iOS SDK you are targeting and what version of gcc you have on your machine you may have to tweak some of the changes below so they are appropriate for your environment. The instructions below will build for armv6. You'll need to change the settings to build for armv7 once you are ready to tackle that architecture.

Find CC= cc and change it to: CC= /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2

Find -arch i386 in CFLAG and change it to: -arch armv6

Find CFLAG and add to the BEGINNING!!: -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.0.sdk

Find SHARED_LDFLAGS=-arch i386 -dynamiclib and change it to: SHARED_LDFLAGS=-arch armv6 -dynamiclib