OpenSSL Certificate (Version 3) with Subject Alternative Name
I'm using the OpenSSL command line tool to generate a self signed certificate. It seems to be working correctly except for two issues. I can't get it to create a .cer with a Subject Alternative Name (critical) and I haven't been able to figure out how to create a cert that is Version 3 (not sure if this is critical yet but would prefer learning how to set the version).
Has anyone done this successfully? The default config (.cfg) file has seemingly clear documentation (seen below):
This stuff is for subjectAltName and issuerAltname. Import the email address. subjectAltName=email:copy
However this does not work. My hunch is that the subject Alternative Name is not showing up b/c it is not present in the V1 specs, which is why I'm also pursuing setting the version.
Here is the config file I'm using:
[ req ]
default_bits = 2048
default_keyfile = privkey.pem
distinguished_name = req_distinguished_name
emailAddress = myEmail@email.com
req_extensions = v3_req
x509_extensions = v3_ca
[req_distinguished_name]
C = [Press Enter to Continue]
C_default = US
C_min = 2
C_max = 2
O = [Press Enter to Continue]
O_default = default
0.OU=[Press Enter to Continue]
0.OU_default = default
1.OU=[Press Enter to Continue]
1.OU_default = PKI
2.OU=[Press Enter to Continue]
2.OU_default = ABCD
commonName = Public FQDN of server
commonName_max = 64
[ v3_req ]
basicConstrain开发者_运维技巧ts = CA:FALSE
keyUsage = digitalSignature, nonRepudiation, keyEncipherment
[ v3_ca ]
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid:always,issuer:always
subjectAltName = email:myEmail@email.com
issuerAltName = issuer:copy
Here is the simple steps for you
While generating the CSR you should use -config and -extensions
and while generating certificate you should use -extfile and -extensions
Here is the example:
openssl req -new -nodes -keyout test.key -out test.csr -days 3650 -subj "/C=US/ST=SCA/L=SCA/O=Oracle/OU=Java/CN=test cert" -config /etc/pki/tls/openssl.cnf -extensions v3_req
openssl x509 -req -days 3650 -in test.csr -CA cacert.pem -CAkey rootCA.key -CAcreateserial -out test.pem -extfile /etc/pki/tls/openssl.cnf -extensions v3_req
hope this helps
Alright, none of the other answers on this page worked for me, and I tried every last one of them. What worked for me was a little trick:
when requesting the cert:
-config <(cat /etc/ssl/openssl.cnf <(printf "[SAN]\nsubjectAltName=DNS:$SERVER")) \
-reqexts SAN
and when signing the cert:
-extfile <(cat /etc/ssl/openssl.cnf <(printf "[SAN]\nsubjectAltName=DNS:$SERVER")) \
-extensions SAN
Notice that this is a bash trick, <(some comamnds) makes the stdout output of some commands show as a temp file to the outer commands in bash.
So there is no confusion, here is a working script that covers everything from the start, including creating a certificate authority:
# if the server name is undefined, lets default to 'Some-Server'
SERVER="${SERVER:-Some-Server}"
CORPORATION=My-Corp
GROUP=My-Corporate-Group
CITY=City
STATE=State
COUNTRY=US
CERT_AUTH_PASS=`openssl rand -base64 32`
echo $CERT_AUTH_PASS > cert_auth_password
CERT_AUTH_PASS=`cat cert_auth_password`
# create the certificate authority
openssl \
req \
-subj "/CN=$SERVER.ca/OU=$GROUP/O=$CORPORATION/L=$CITY/ST=$STATE/C=$COUNTRY" \
-new \
-x509 \
-passout pass:$CERT_AUTH_PASS \
-keyout ca-cert.key \
-out ca-cert.crt \
-days 36500
# create client private key (used to decrypt the cert we get from the CA)
openssl genrsa -out $SERVER.key
# create the CSR(Certitificate Signing Request)
openssl \
req \
-new \
-nodes \
-subj "/CN=$SERVER/OU=$GROUP/O=$CORPORATION/L=$CITY/ST=$STATE/C=$COUNTRY" \
-sha256 \
-extensions v3_req \
-reqexts SAN \
-key $SERVER.key \
-out $SERVER.csr \
-config <(cat /etc/ssl/openssl.cnf <(printf "[SAN]\nsubjectAltName=DNS:$SERVER")) \
-days 36500
# sign the certificate with the certificate authority
openssl \
x509 \
-req \
-days 36500 \
-in $SERVER.csr \
-CA ca-cert.crt \
-CAkey ca-cert.key \
-CAcreateserial \
-out $SERVER.crt \
-extfile <(cat /etc/ssl/openssl.cnf <(printf "[SAN]\nsubjectAltName=DNS:$SERVER")) \
-extensions SAN \
-passin pass:$CERT_AUTH_PASS
We can then verify that the Subject Alternative name is in the final cert:
openssl x509 -in Some-Server.crt -text -noout
The pertinent section is:
X509v3 extensions:
X509v3 Subject Alternative Name:
DNS:Some-Server
So it worked! This is a cert that will be accepted by every major browser (including chrome), so long as you install the certificate authority in the browser. Thats ca-cert.crt that you will need to install.
Here is a sample configuration for nginx that would allow you to use the cert:
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name localhost:443;
ssl_certificate /etc/ssl/certs/Some-Server.crt;
ssl_certificate_key /etc/ssl/private/Some-Server.key;
ssl_dhparam /etc/ssl/certs/https-dhparam.pem;
location / {
root /usr/share/nginx/html;
index index.html index.htm;
}
}
I got it to work with the following version (emailAddress was incorrectly placed) :
[ req ]
default_bits = 2048
default_keyfile = privkey.pem
distinguished_name = req_distinguished_name
req_extensions = v3_req
x509_extensions = v3_ca
[req_distinguished_name]
C = [Press Enter to Continue]
C_default = US
C_min = 2
C_max = 2
O = [Press Enter to Continue]
O_default = default
0.OU=[Press Enter to Continue]
0.OU_default = default
1.OU=[Press Enter to Continue]
1.OU_default = PKI
2.OU=[Press Enter to Continue]
2.OU_default = ABCD
commonName = Public FQDN of server
commonName_max = 64
emailAddress = [Press Enter to Continue]
emailAddress_default = myEmail@email.com
[ v3_req ]
basicConstraints = CA:FALSE
keyUsage = digitalSignature, nonRepudiation, keyEncipherment
[ v3_ca ]
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid:always,issuer:always
subjectAltName = email:myEmail@email.com
issuerAltName = issuer:copy
Notes:
To generate the certificate I used:
openssl req -config req.cnf -new -nodes -out req.pem -x509- I haven't seen much use for
issuerAltname(if you have I'd be interested to know where). - Using
issuer:alwaysisn't recommended forauthorityKeyIdentifier. - Using
email:copynow works withsubjectAltName. v3_reqsection is superfluous (as well asreq_extensionsline.
I just developed a web based tool that will generate this command automatically based on form input and display the output.
UPDATE: see certificatetools.com
It became so popular that I improved it and published it under its own domain name.
It will not only give you the downloadable .csr, but also provide the openssl commands that were used to generate it, and the needed openssl.cnf configuration options.
Example:
OpenSSL Commands
#generate the RSA private key
openssl genpkey -outform PEM -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out priv.key
#Create the CSR
openssl req -new -nodes -key priv.key -config csrconfig.txt -out cert.csr
OpenSSL CSR Config
[ req ]
default_md = sha256
prompt = no
req_extensions = req_ext
distinguished_name = req_distinguished_name
[ req_distinguished_name ]
commonName = example.com
countryName = US
stateOrProvinceName = Louisiana
localityName = Slidell
organizationName = Acme Inc.
[ req_ext ]
keyUsage=critical,digitalSignature,keyEncipherment
extendedKeyUsage=critical,serverAuth,clientAuth
subjectAltName = @alt_names
[ alt_names ]
IP.0 = 1.1.1.1
IP.1 = 2.2.2.2
DNS.0 = server1.example.com
DNS.1 = server2.example.com
email.0 = email1@example.com
email.1 = email2@example.com
What command did you use to make the CSR certificate request? What command did you use to make the certificate file? Different answers for different circumstances you know.
Maybe you are not putting
subjectAltName=email:copy
in the section
[v3_req]
Maybe you are using openssl x509 to generate the certificate, if so you must use
-extfile /etc/pki/tls/openssl.cnf
because without that it doesnt use your config file
You also might need
-extensions v3_req
command line switch
I referred to several pages, and the most significant helps are from 1. https://geekflare.com/san-ssl-certificate/, 2. https://certificatetools.com/ (see answer from user40662), and 3. answer from Raghu K Nair about the command usage.
Then my successful try:
san.cnf
[ req ]
default_bits = 2048
default_md = sha256
distinguished_name = req_distinguished_name
req_extensions = v3_req
[ req_distinguished_name ]
countryName = CN # C=
stateOrProvinceName = Shanghai # ST=
localityName = Shanghai # L=
#postalCode = 200000 # L/postalcode=
#streetAddress = "My Address" # L/street=
organizationName = My Corporation # O=
organizationalUnitName = My Department # OU=
commonName = myname.mysoftware.mycorporation.com # CN=
emailAddress = myname@example.com # CN/emailAddress=
[ v3_req ]
subjectAltName = @alt_names
[ alt_names ]
DNS.1 = myname.mysoftware.mycorporation.com
#DNS.2 = other2.com
#DNS.3 = other3.com
Command:
openssl req -x509 -nodes -days 365 -subj "/C=CN/ST=Shanghai/L=Shanghai/O=My Corporation/OU=My Department/CN=myname.mysoftware.mycorporation.com/emailAddress=myname@example.com" -keyout privateKey.pem -out certificate.crt -config san.cnf -extensions v3_req
The v3_req is required with the entry subjectAltName in the config file. The command
openssl x509 ... -extfile openssl.cnf -extensions v3_req
will insert the SAN into the certificate.
I know this thread is a little old but just in case it works for anyone on windows, check that the file is UTF-8 encoded, in my case I was getting an error indicating there was an error with the .cnf file, so I opened it on Notepad++ set the file encoding to UTF-8, saved, and ran the openssl command again and it made the trick.
#! /bin/dash
# Steps 1-3 show how to use openssl to create a certificate request
# that includes Subject Alternative Names.
# In the uncommon case where you are creating your own CA, steps 4-6
# show how to use openssl to create a CA and then use that CA to
# create a certificate from the request.
# Step 1: Create an OpenSSL configuration file
# to specify the Subject Alternative Names
echo ; echo 'step 1'
cat > foo.cnf <<EOF
[ req ]
distinguished_name = arbitrary_name_1
req_extensions = arbitrary_name_2
[ arbitrary_name_1 ]
[ arbitrary_name_2 ]
subjectAltName = @arbitrary_name_3
[ arbitrary_name_3 ]
DNS.1 = foo.com
DNS.2 = bar.com
DNS.3 = baz.com
EOF
# Step 2: Create a certificate request for foo.com.
#
# openssl
# req
# -config read openssl configuration from this file
# -subj set the commonName of the certificate
# -newkey generate a new key (and, by implication, a new request!)
# -nodes do not encrypt the new private key ("no DES")
# -keyout write the new private key to this file
# -out write the request to this file
echo ; echo 'step 2'
openssl \
req \
-config foo.cnf \
-subj '/CN=foo.com' \
-newkey rsa:2048 \
-nodes \
-keyout foo.key \
-out foo.req
# Step 3: Display the requested extensions.
echo ; echo 'step 3'
openssl req -in foo.req -noout -text | \
grep -A 2 'Requested Extensions:'
# Step 4: Create a certificate authority by creating
# a private key and self-signed certificate.
#
# openssl
# req generate a certificate request, but don't because ...
# -x509 generate a self-signed certificate instead
# -subj set the commonName of the certificate
# -days certificate is valid for N days, starting now
# -newkey generate a new private key
# -nodes do not encrypt the new private key ("no DES")
# -keyout write the new private key to this file
# -out write the self-signed certificate to this file
echo ; echo 'step 4'
openssl \
req \
-x509 \
-subj "/CN=Custom CA" \
-days 4000 \
-newkey rsa:2048 \
-nodes \
-keyout ca.key \
-out ca.cert
# Step 5: Use the certificate authority
# to create a certificate for foo.com.
#
# openssl
# x509 operate on an x509 certificate
# -req create an x509 certificate from a request
# -in read the request from this file
# -CA read the CA certificate from this file
# -CAkey read the CA key form this file
# -extfile read openssl's configuration from this file
# -extensions read extensions from this section of the configuration
# -days certificate is valid for N days, starting now
# -set_serial set the new certificate's serial number
# -out write the new certificate to this file
echo ; echo 'step 5'
openssl \
x509 \
-req \
-in foo.req \
-CA ca.cert \
-CAkey ca.key \
-extfile foo.cnf \
-extensions arbitrary_name_2 \
-days 30 \
-set_serial 1001 \
-out foo.cert
# Step 6: Display the X509v3 extensions:
echo ; echo 'step 6'
openssl x509 -in foo.cert -noout -text | \
grep -A 2 'X509v3 extensions:'
Though after following the steps described here I started .csr files with: X509v3 Subject Alternative Name However, my .crt (.pem) files generated with:
openssl x509 -req -in domain.csr -extensions SAN -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out domain.crt -days 100
still were with:
Version: 1 (0x0)
and without:
X509v3 Subject Alternative Name
Solution
Issue was resolved after I switched to this one:
openssl ca -in domain.csr -cert rootCA.pem -keyfile rootCA.key -out domain.crt
I started to get domain.crt files with:
Version: 3 (0x2)
and
X509v3 Subject Alternative Name
If openssl ca complains, you might need to adjust openssl.cnf (or /etc/ssl/openssl.cnf for ubuntu, NOTE: if you used brew install openssl - it will be in a different location) file. Just make sure you properly set these:
[ CA_default ]
dir= /path/to/rootCA/folder # Where everything is kept
certificate= $dir/rootCA.pem # The CA certificate
serial= $dir/rootCA.srl # The current serial number
private_key= $dir/rootCA.key # The private key
And run: touch /path/to/index.txt
To generate rootCA.srl you can still use the old command:
openssl x509 -req -in domain.csr -extensions SAN -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out domain.crt -days 100
More details on openssl ca can be found here: https://www.openssl.org/docs/man1.0.2/man1/ca.html
Basing on that answer this slightly different approach worked for me:
- create a
server.cnf-file with:
nsCertType = server
nsComment = "OpenSSL Generated Server Certificate"
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid,issuer:always
keyUsage = critical, digitalSignature, keyEncipherment
extendedKeyUsage = serverAuth
subjectAltName = @alt_names
[alt_names]
IP.1 = 127.0.0.1
DNS.1 = localhost
- generate your CSR
openssl genrsa -out yourServer_private.key 4096
openssl req -new -key yourServer_private.key -out yourServer.csr
- create your certificate and add SAN-information
openssl x509 -req -days 3650 -in yourServer.csr -CA ../Root/Ca.pem -CAkey ../Root/Ca.key -set_serial 01 -out yourServer.pem -extfile server.cnf
- check your result
openssl x509 -in yourServer.pem -text
=>
(...)
X509v3 Extended Key Usage:
TLS Web Server Authentication
X509v3 Subject Alternative Name:
IP Address:127.0.0.1, DNS:localhost
Signature Algorithm: sha256WithRSAEncryption
(...)
加载中,请稍侯......
精彩评论