Swapping X and Y on my touchscreen

I successfuly installed (after 1 week of work) Android on BeagleBoard C4. As display I use Lilliput 669 with an eGalax Usb TouchController. Everything seems ok with exception of touchscreen which have X and Y axes reverse.

I: Bus=0003 开发者_高级运维Vendor=0eef Product=0001 Version=0210 N: Name="eGalax Inc. USB TouchController" P: Phys=usb-ehci-omap.0-2.2/input0 S: Sysfs=/devices/platform/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1 U: Uniq= H: Handlers=event1 B: EV=9 B: ABS=600000 3

I: Bus=0003 Vendor=0eef Product=0001 Version=0210 N: Name="eGalax Inc. USB TouchController" P: Phys=usb-ehci-omap.0-2.2/input0 S: Sysfs=/devices/platform/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input2 U: Uniq= H: Handlers=mouse0 event2 B: EV=1b B: KEY=400 0 0 0 0 0 0 0 0 0 0 B: ABS=600000 3 B: MSC=10

Do you know how to reverse X and Y axis for my touchscreen ?

I know that this post is old, but this was a problem I encountered recently while I swapped the broken touchscreen from my Android tablet. The replacement was a poorly manufactured p.o.c.s... Anyway, after I plugged it in, the xy was swapped first, then I turned the connector over and it was just an x-axis problem. I knew that if I flipped the glass over, it would fix it, but that would make the connector too far away from the port on the motherboard. So I just plugged it in, and went to the settings of the tablet, and calibrated the touchscreen from the settings menu. Done. That's it. SOLUTION: Just go to the settings option in the menu and find the "Touchscreen Calibration" option and calibrate it again. This should fix it :) Or just flip connector around and try again :) The reason I posted this is to help others who might have this problem :)