I wish to split a large avi video into two smaller consecutive videos. I am using ffmpeg.

One way is to run ffmpeg two times:

ffmpeg -i input.avi -vcodec copy -acodec copy -ss 00:00:00 -t 00:30:00 output1.avi
ffmpeg -i input.avi -vcodec copy -acodec copy开发者_开发知识库 -ss 00:30:00 -t 00:30:00 output2.avi

But according to manpage of ffmpeg, I can make more than one ouput file from one input file using just one line:

ffmpeg -i input.avi -vcodec copy -acodec copy -ss 00:00:00 -t 00:30:00 output1.avi \
   -vcodec copy -acodec copy -ss 00:30:00 -t 00:30:00 output2.avi

My question is, does the later approach save computation time and memory?

The ffmpeg wiki links back to this page in reference to "How to split video efficiently". I'm not convinced this page answers that question, so I did as @AlcubierreDrive suggested…

echo "Two commands" 
time ffmpeg -v quiet -y -i input.ts -vcodec copy -acodec copy -ss 00:00:00 -t 00:30:00 -sn test1.mkv
time ffmpeg -v quiet -y -i input.ts -vcodec copy -acodec copy -ss 00:30:00 -t 01:00:00 -sn test2.mkv
echo "One command" 
time ffmpeg -v quiet -y -i input.ts -vcodec copy -acodec copy -ss 00:00:00 -t 00:30:00 \
  -sn test3.mkv -vcodec copy -acodec copy -ss 00:30:00 -t 01:00:00 -sn test4.mkv

Which outputs...

Two commands
real    0m16.201s
user    0m1.830s
sys 0m1.301s

real    0m43.621s
user    0m4.943s
sys 0m2.908s

One command
real    0m59.410s
user    0m5.577s
sys 0m3.939s

I tested a SD & HD file, after a few runs & a little maths.

Two commands SD 0m53.94 #2 wins  
One command  SD 0m49.63  

Two commands SD 0m55.00  
One command  SD 0m52.26 #1 wins 

Two commands SD 0m58.60 #2 wins  
One command  SD 0m58.61 

Two commands SD 0m54.60  
One command  SD 0m50.51 #1 wins 

Two commands SD 0m53.94  
One command  SD 0m49.63 #1 wins  

Two commands SD 0m55.00  
One command  SD 0m52.26 #1 wins 

Two commands SD 0m58.71  
One command  SD 0m58.61 #1 wins

Two commands SD 0m54.63  
One command  SD 0m50.51 #1 wins  

Two commands SD 1m6.67s #2 wins  
One command  SD 1m20.18  

Two commands SD 1m7.67  
One command  SD 1m6.72 #1 wins

Two commands SD 1m4.92  
One command  SD 1m2.24 #1 wins

Two commands SD 1m1.73  
One command  SD 0m59.72 #1 wins

Two commands HD 4m23.20  
One command  HD 3m40.02 #1 wins

Two commands SD 1m1.30  
One command  SD 0m59.59 #1 wins  

Two commands HD 3m47.89  
One command  HD 3m29.59 #1 wins  

Two commands SD 0m59.82  
One command  SD 0m59.41 #1 wins  

Two commands HD 3m51.18  
One command  HD 3m30.79 #1 wins  

SD file = 1.35GB DVB transport stream
HD file = 3.14GB DVB transport stream

Conclusion

The single command is better if you are handling HD, it agrees with the manuals comments on using -ss after the input file to do a 'slow seek'. SD files have a negligible difference.

The two command version should be quicker by adding another -ss before the input file for the a 'fast seek' followed by the more accurate slow seek.

Here's a useful script, it helps you split automatically: A script for splitting videos using ffmpeg

#!/bin/bash
 
# Written by Alexis Bezverkhyy <alexis@grapsus.net> in 2011
# This is free and unencumbered software released into the public domain.
# For more information, please refer to <http://unlicense.org/>
 
function usage {
        echo "Usage : ffsplit.sh input.file chunk-duration [output-filename-format]"
        echo -e "\t - input file may be any kind of file reconginzed by ffmpeg"
        echo -e "\t - chunk duration must be in seconds"
        echo -e "\t - output filename format must be printf-like, for example myvideo-part-%04d.avi"
        echo -e "\t - if no output filename format is given, it will be computed\
 automatically from input filename"
}
 
IN_FILE="$1"
OUT_FILE_FORMAT="$3"
typeset -i CHUNK_LEN
CHUNK_LEN="$2"
 
DURATION_HMS=$(ffmpeg -i "$IN_FILE" 2>&1 | grep Duration | cut -f 4 -d ' ')
DURATION_H=$(echo "$DURATION_HMS" | cut -d ':' -f 1)
DURATION_M=$(echo "$DURATION_HMS" | cut -d ':' -f 2)
DURATION_S=$(echo "$DURATION_HMS" | cut -d ':' -f 3 | cut -d '.' -f 1)
let "DURATION = ( DURATION_H * 60 + DURATION_M ) * 60 + DURATION_S"
 
if [ "$DURATION" = '0' ] ; then
        echo "Invalid input video"
        usage
        exit 1
fi
 
if [ "$CHUNK_LEN" = "0" ] ; then
        echo "Invalid chunk size"
        usage
        exit 2
fi
 
if [ -z "$OUT_FILE_FORMAT" ] ; then
        FILE_EXT=$(echo "$IN_FILE" | sed 's/^.*\.\([a-zA-Z0-9]\+\)$/\1/')
        FILE_NAME=$(echo "$IN_FILE" | sed 's/^\(.*\)\.[a-zA-Z0-9]\+$/\1/')
        OUT_FILE_FORMAT="${FILE_NAME}-%03d.${FILE_EXT}"
        echo "Using default output file format : $OUT_FILE_FORMAT"
fi
 
N='1'
OFFSET='0'
let 'N_FILES = DURATION / CHUNK_LEN + 1'
 
while [ "$OFFSET" -lt "$DURATION" ] ; do
        OUT_FILE=$(printf "$OUT_FILE_FORMAT" "$N")
        echo "writing $OUT_FILE ($N/$N_FILES)..."
        ffmpeg -i "$IN_FILE" -vcodec copy -acodec copy -ss "$OFFSET" -t "$CHUNK_LEN" "$OUT_FILE"
        let "N = N + 1"
        let "OFFSET = OFFSET + CHUNK_LEN"
done

In my experience, don't use ffmpeg for splitting/join. MP4Box, is faster and light than ffmpeg. Please tryit. Eg if you want to split a 1400mb MP4 file into two parts a 700mb you can use the following cmdl: MP4Box -splits 716800 input.mp4 eg for concatenating two files you can use:

MP4Box -cat file1.mp4 -cat file2.mp4 output.mp4

Or if you need split by time, use -splitx StartTime:EndTime:

MP4Box -add input.mp4 -splitx 0:15 -new split.mp4

http://ffmpeg.org/trac/ffmpeg/wiki/Seeking%20with%20FFmpeg may also be useful to you. Also ffmpeg has a segment muxer that might work.

Anyway my guess is that combining them into one command would save time.

does the later approach save computation time and memory?

There is no big difference between those two examples that you provided. The first example cuts the video sequentially, in 2 steps, while the second example does it at the same time (using threads). No particular speed-up will be noticeable. You can read more about creating multiple outputs with FFmpeg

Further more, what you can use (in recent FFmpeg) is the stream segmenter muxer which can:

output streams to a number of separate files of nearly fixed duration. Output filename pattern can be set in a fashion similar to image2.

Here is a simple Windows bat file to split incoming file into 50 parts. Each part has length 1 minute. Sorry for such dumb script. I hope it is better to have a dumb windows script instead of do not have it at all. Perhaps it help someone. (Based on "bat file for loop" from this site.)

set var=0
@echo off
:start
set lz=
if %var% EQU 50 goto end
if %var% LEQ 9 set lz=0
echo part %lz%%var%
ffmpeg -ss 00:%lz%%var%:00 -t 00:01:00 -i %1 -acodec copy -vcodec copy %2_%lz%%var%.mp4
set /a var+=1
goto start

:end
echo var has reached %var%.
exit

Didn't test ist, but this looks promising:

Basic stream segmenter

It is obviously splitting AVI into segments of same size, which implies these chunks don't loose quality or increase memory or must be recalculated.

It also uses the codec copy - does that mean it can handle very large streams ? Because this is my problem, i want to break down my avi so i could use a filter to get rid of the distorsion. But a whole avi runs for hours.

Split video from:
-i - Input video file
-ss - starting time
-t - duration of split video
-c - (codec)
-c - copy (copy the codec with no changes)

ffmpeg -i input.mp4 -ss 00:00:50.0 -codec copy -t 30 output.mp4

This command will split the source video into 2 parts..

ffmpeg -i input.avi -t 00:00:50 -c copy output1.avi -ss 00:00:50 -codec copy output2.avi

Here is a perfect way to split the video. I have done it previously, and it's working well for me.

ffmpeg -i C:\xampp\htdocs\videoCutting\movie.mp4 -ss 00:00:00 -t 00:00:05 -async 1 C:\xampp\htdocs\videoCutting\SampleVideoNew.mp4 (For cmd). shell_exec('ffmpeg -i C:\xampp\htdocs\videoCutting\movie.mp4 -ss 00:00:00 -t 00:00:05 -async 1 C:\xampp\htdocs\videoCutting\SampleVideoNew.mp4') (for php).

Please follow this and I am sure it will work perfectly.

one simple way is to use trim option with publitio url-based api.

once you get your video uploaded, just set start offset and end offset in url (so_2,eo_2) like so:

    https://media.publit.io/file/so_2,eo_2/tummy.mp4

this will create instantly new videos starting from 2nd second and 2 seconds in length. you can split videos this way anyway you like.